Product Description
CYLINDRICAL OPEN TOP TANKS
Tanks are manufactured in one piece, seamless construction and liquid tight. Made of 100% 1st grade Linear Polyethylene (LMDPE) resin, they will not rust or corrode and are nearly indestructible. They are designed for either indoor or outdoor application and conforming to ASTM D 1998-97 Designed Standards for liquid storage. All are efficiently lightweight for easy transportation and installation. They possess excellent low temperature impact resistance and are U.V. stabilized. These tough, heavy walled tanks are designed for normal and heavy-duty industrial applications, ideally for bulk water and chemical storage (resistant to most chemicals-technical data available upon request). Excellent Environmental Stress Crack Resistance (ESCR) and provide durability under severe conditions.
A) Loose Flat Cover Cylindrical Brim Tanks
Model | Capacity | Outer Diameter (mm)A | Total Height(mm)B | ||
DAM Series | Liters | Gals | |||
1 | DAM-110 | 120 | 26 | 460 | 810 |
2 | DAM-200 | 220 | 48 | 560 | 950 |
3 | DAM-350 | 370 | 81 | 720 | 950 |
4 | DAM-550 | 580 | 128 | 1000 | 810 |
5 | DAM-750 | 780 | 172 | 1000 | 1050 |
6 | DAM-1000 | 1080 | 238 | 1130 | 1200 |
- Note: All dimension figures given with Tolerance Allowable ±5mm (Duty: Max S.G. 1.6)
B) Flat Top Cylindrical Brim Tanks With Handhole
Model | Capacity | Outer Diameter (mm)A | Brim Height(mm)B | Total Height(mm)C | ||
DBM Series | Liters | Gals | ||||
1 | DBM-110 | 120 | 26 | 460 | 800 | 930 |
2 | DBM-200 | 220 | 48 | 560 | 940 | 1080 |
3 | DBM-350 | 370 | 81 | 720 | 940 | 1080 |
4 | DBM-550 | 580 | 128 | 1000 | 800 | 950 |
5 | DBM-750 | 780 | 172 | 1000 | 1040 | 1170 |
- Note: All dimension figures given with Tolerance Allowable ±5mm (Duty: Max S.G. 1.6)
PE RESIN SPECIFICATIONS
Physical Properties | Test Method | Values | |
Resin properties(1) | |||
Melt Index, g/10 min | ISO 1133 | 4 | |
Density, g/cc | ISO 1183 | 0.935 | |
Melting Point, °C | DSC | 125 | |
Vicat Softening, °C | ISO 306 (Method A/120) | 118 | |
Crystallisation Point, °C | DSC | 105 | |
Deflection Temperature Under Load | ISO 75 | 75 | |
Mechanical Properties(1) | Values (2) | Values (3) | |
Hardness Shore D | ISO R868 | 57 | – |
Tensile Yield, MPa | ISO R527 | 17 | 17 |
Ultimate Tensile, MPa | ISO R527 | 24.7 | 21.8 |
Ultimate Elongation, % | ISO R527 | 800 | 700 |
Flexural Modulus, 1% Secant, MPa | ISO 178 | 640 | – |
Tear Resistance, MPa | DIN 53515 | 145 | 140 |
ESCR 50 oC, 100% Antarox, h 10% Antarox, h |
ASTM D-1693 | >1000 – |
– 400 |
Falling Dart Impact, 23 °C, J/mm -20 °C, J/mm |
ISO 6603/2 | 17 23 |
17 – |
(1) Typical values, not to be construed as specifications. Users should confirm results with their own tests.
(2) Compression moulded samples.
(3) Rotomolded plates of 3-3 mm thickness
GENERAL CHEMICAL RESISTANCE CHART
Chemical Class | Polyethylene Resins |
Acids, Inorganic Weak Strong Strong Oxidising |
– E E G |
Acids, Inorganic Weak Strong |
– E E |
Alcohols | E |
Aldehydes | E |
Amines Aliphatic Aromatic |
– E E |
Bases | E |
Beverages | E |
Condiments | E |
Esters | G |
Foodstuffs | E |
Glycols Polyglycols Polyglycols ethers |
– E E |
Hydrocarbons Aliphatic Aromatic Chlorinated |
– N N N |
Insecticides | G |
Ketones | G |
Oils Essential Oils Vegetable Oils |
– F E |
Pharmaceuticals | E |
Salts | E |
E – Excellent G – Good
F – Fair N – Not Recommended
This table should be used as a guide only.
Source of Information : Dow Plastics