Tel: (65) 6749 0876, 6749 1678 | Fax: (65) 6749 3063

Email: polyfluo@singnet.com.sg

IBC – Intermediate Bulk Containers

IBC

IBC – Intermediate Bulk Containers

The ideal transportation tank for chemicals.
Our IBCs are made from blow moulding in a single bottle and has the following advantages:-

 

1. Space saving innovation. 4 drums each with a volume of 200 litres, utilise the same space as a 1000 Litre IBC. A minimum of 20% better space utilisation.

 

2. The IBC meets international transport standards and regulations as well as providing an excellent fill in ISO-Containers. Their low tare weight is a further financial benefit during transport.

 

3. The IBC is easy to handle and can be stacked 3 high quite safely with liquids up to 1.3 S.G. It is easy to load or unload by use of fork-lift, pallet truck or crane, thus ensuring the best use of time and resources.

 

4. The specifically designed discharge valves guarantee safe and precise control of contents during emptying. The alternative discharge diameters allow products of very different viscosities to flow freely. The various types of valve options are all screwed-on to facilitate reconditioning.

 

5. Nowadays one of the most important considerations affecting packaging system selection is in its value after the initial journey. The IBC can be filled and shipped many times thus making it a fully reusable and therefore a multi-trip package.

 

6. The IBC offers the ideal module system incorporating easy-to-fit exchangeable plastic, metal or timber components. This enables the container to be used repeatedly but ensures simple and economic refurbishment when necessary. Finally disposal of waste and the return of product to the raws material cycle is made easier.

 

7. Available in steel or plastic pallets.

Product Description

INNER-BOTTLE
Material High density polyethylene with UV protection (neutral)
Production Method Blow Moulding
Maximum Capacity 1.055l
Filling Opening 150 mm (225mm on request)
Emptying Optimal

Layer-1

BUTTERFLY VALVE (DIN 50)
Material High density polyethylene with UV protection (neutral)
Production Method Injection Moulding
Standard Gaskete ETFE/PE

Layer-2

CLOSURE LID
Material High density polyethylene with UV protection (neutral)
Production Method Injection Moulding
Diameter 160mm (225 mm on request)
Degasing (on request) Hydrofobic membrane

Layer-3

STEELCAGE / PALLET
Cage Material Galvanised Steel Tubes (18 x 18 mm)
Production Method Spotwelding
Pallet Material Steel

 

FLUBOX
INNER-BOTTLE+VALVE+CLOSURE+CAGE+PALLET

Total Weight 57 kg (+/- 3%)
Stackability 1 + 1 (Dynamic) 1 + 2 (Static)
Transport in ISO Container 18 pcs (ISO cont 20′) 40 pcs (ISO cont 40′)
Emptying Optimal
Homologations
in compliance with the international transport regulations
by road (ADR)
by rail (RID)
by sea (IMO)
31HA1/Y/D/FPL/8AM 6849-FPL/3775/2014

 

WARNINGS:– in case of reuse, the user has to check the IBC condition
– if necessary, change valve after each trip
– do not use filling goods exceeding 60 degree
– protect from direct sunlight during storage

 

TECHNICAL DATA SHEET

1m3 IBC

Capacity 1.000 liter – 0 + 6%
Outside Dimension
Length
Width
Height
1.200 mm +/- 5
1.200 mm +/- 5
1.200 mm +/- 5
Bottle
Weight (without valve and screw cap)
MaterialWall thickness
Bottle flange
18,0 kg +/- 0,5
HDPE co0extruded Lupolen4261 A inside and
Lupolen 5261 ZQ outside, UV stabilised
2,0 mm minimum
HDPE
Screw cap
Material
Gasket
Vent
150 mm (S160 x 7), possibility of tamper evidence
Lupolen 4261 A coloured in black
Expanded natural rubber 7mm
Yes
Valve
Material
Seals
2” ball or piston valve (NW 50)
HDPE and PP
Santoprene®, EPDM, NBR or FKM (Viton®)
Valve cap
Material
Seal
Tamper evident
HDPE
EPE (expanded polyethylene)
Pallet
Material
4 ways
Gallvanised Steel
Cage
Material
Identification Plate
Welded thermo-galvanised steel tubes coated with a transparent varnish
480 x 500 mm
UN approval according to IMO/IMDG ADR & RID

Maximum relative density

Hydraulic test pressure

31HA1/Y/(1)/F/VL.F/BVT 1033202/7200/1750
50 kg/1050 1/(2)/100 kPa
1) month and year of production
2) month and year of last inspectionwater: 1,6/wetting solution : 1,6 / acetic acid : 1,6 / n-butyl acetate : 1,4 / mixture of hydrocarbons (white spirit) : 1,4
100 kPa
Static Stacking 1 + 2 maximum density 1,6

subjected to technical modifications